GATE ECE · Analog Circuits
Generate GATE-level questions on Frequency Response. Focus on: 1. Low and High frequency response of BJT/MOSFET amplifiers. 2. Miller effect and Cascode amplifiers. 3. Gain-bandwidth product.
7 questions · 7 PYQs · 0 AI practice · GATE ECE 2027
🎯 These are sample questions
Just sign in to unlock everything. Free for all students.
All the components in the bandpass filter given below are ideal. The lower frequency of the filter is 1 MHz . The upper frequency (in MHz , rounded off to the nearest integer) is __________ .

For the closed loop amplifier circuit shown below, the magnitude of open loop low frequency small signal voltage gain is 40. All the transistors are biased in saturation. The current source Iss is ideal. Neglect body effect. channel length modulation and intrinsic device capacitances. The closed loop low frequency small signal voltage gain (rounded off to three decimal places) is ____.

The Miller effect in the context of a Common Emitter amplifier explains
Which one of the following statements is correct about an ac-coupled common-emitter amplifier operating in the mid-band region?
The ac schematic of an NMOS common-source stage is shown in the figure below, where part of the biasing circuits has been omitted for simplicity. For the n -channel MOSFET M, the transconductance and body effect and channel length modulation effect are to be neglected. The lower cutoff frequency in Hz of the circuit is approximately at

A bipolar transistor is operating in the active region with a collector current of 1 mA. Assuming that the of the transistor is 100 and the thermal voltage ( ) is 25 mV, the transconductance ( ) and the input resistance ( ) of the transistor in the common emitter configuration, are
An npn BJT has , , and DC current gain . For this transistor and are
Want unlimited AI-generated Frequency Response Of Amplifiers questions?
Sign up free and practice with adaptive difficulty — Easy, Medium, Hard. New questions every session.
Start practising for free →